Storage tank spheres

After taking these spherical storage tanks down to an SSPC SP-6 commercial blast, a high solids epoxy primer was applied before an acrylic elastomeric topcoat finished off the supports. On the spheres themselves, a high solids epoxy primer was also used, followed by an epoxy mastic intermediate coat and an acrylic siloxane finishing coat.

Technical Details

Project Type

Storage tank

Surface Prep

Commercial Blast SP-6

Application Method

Brush and roll

Coating System

Finish: AquaGrip 5200

Primer: MasticGrip 2500
Intermediate: EpoxyGrip 2000
Finish: MultiGrip 7000XP